2369445 is a direct replacement for Titan part 2342946 an outlet valve assembly used in the fluid section of compatible Elite and PowrLiner airless sprayers. This assembly includes the valve seat, ball, and cage, working together to create a one‑way seal that prevents backflow and maintains consistent pressure during spraying. Replacing a worn or damaged outlet valve assembly restores pump efficiency, eliminates pressure loss, and ensures reliable operation.
| Part Number | 2369445 (Replaces Titan 2342946) |
|---|---|
| Part Description | Outlet Valve Assembly |
| Brand | Titan |
| Fits | Elite 3000, 3500 72v, 5500; PowrLiner 3000, 3500s (Suffixed Unit), 3500 72v (Honda GXE), 5500 |
| Condition | New |
The Titan 2369445 Outlet Valve Assembly (replaces OEM part 2342946) is a critical fluid‑control component used in the pump section of compatible Titan airless sprayers. It opens under pressure to deliver paint to the spray gun and seals tightly when the trigger is released, preventing material from siphoning back or leaking.
Over time, abrasive paint, dried material, or normal wear can cause the outlet valve to leak or stick. Symptoms include pressure fluctuation, inconsistent spray pattern, failure to hold pressure when the gun is released, or dripping from the gun tip. Replacing the outlet valve assembly restores proper priming, consistent flow, and reliable system shut‑off.
| Pressure control | Opens at a preset pressure to allow paint to flow to the gun; closes to maintain pressure when the gun is off. |
|---|---|
| Backflow prevention | Prevents material from draining back into the pump, reducing priming time and keeping the system ready. |
| Consistent spray pattern | Ensures steady flow and uniform application by maintaining stable hydraulic pressure. |
| Pressure loss | Sprayer struggles to maintain pressure; pressure drops quickly after trigger release. |
|---|---|
| Erratic spray / surging | Intermittent flow or pulsation that can't be corrected by adjusting pressure or clearing the tip. |
| Leakage / dripping | Paint drips from gun tip even when trigger is not pulled. |
| Hard priming | Sprayer takes excessive time to prime or fails to build pressure during startup. |
The 2369445 outlet valve assembly is a direct replacement for Titan OEM part 2342946 and fits the following Titan Elite and PowrLiner models. Always verify compatibility with your sprayer's parts diagram.
| Titan Model | Component |
|---|---|
| Elite 3000 | Outlet valve assembly |
| Elite 3500 72v | Outlet valve assembly |
| Elite 5500 | Outlet valve assembly |
| PowrLiner 3500 72v | Outlet valve assembly |
| PowrLiner 3500 | Outlet valve assembly |
| PowrLiner 3500s | Outlet valve assembly |
| PowrLiner 5500 | Outlet valve assembly |
Outlet valve failure is often accompanied by wear in other fluid section components. When replacing the outlet valve, it's a good practice to inspect these related parts.
Works in tandem with the outlet valve; a worn inlet valve can cause priming problems and pressure loss.
Worn packings allow internal leakage, resulting in pressure drop and poor performance.
If pressure issues persist after valve replacement, the pressure control may need adjustment or replacement.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
